How vacuum membrane pressing works
MDF parts are routed, sanded and sprayed with adhesive. The film is laid over them, heated in the press and drawn down by vacuum, so the face, the edges and the routed profile are covered in one step.
It is the usual process for kitchen cabinet doors, wardrobe doors and shaped furniture fronts.
Why PVC film
PVC softens when it is heated and stretches without tearing, so it can follow grooves, raised panels and rounded edges. This is why most vacuum pressing lines use PVC film. We also make PET and PP film for this process.
Our films for this process
Every series can be used for vacuum membrane pressing. Send us your door design and we will recommend the thickness.
Specifications
| Material | PVC, PET or PP film |
|---|---|
| Thickness | 0.10–1.5 mm, depending on the series |
| Width | 1240–1420 mm |
| Backing | Plain, or self-adhesive for every series. Self-adhesive film is 1220 mm wide, about 50 m per roll. |
| Minimum order | 1,000 m per color |
| Packing | Rolls lined with pearl cotton foam, wrapped in PVC film and labeled. About 300 m per roll at 0.16 mm and 120 m at 0.35 mm. Custom packing available. |
| Payment | 30% deposit, balance by T/T. Western Union accepted. |
What to send us for a quote
- Your press type
- The door or panel design (a photo or drawing is best)
- Color codes, or a sample to match
- Quantity per color
- Destination port
Questions
Which thickness should I use?
Our films range from 0.10 to 1.5 mm, depending on the series. The right thickness depends on your press, the depth of the profile and the finish. Send us a photo or drawing of the door and we will recommend one.
Can you match my sample?
Yes. Send us your sample and we will match the color and texture.
What is the minimum order?
1,000 m per color.
Ask for samples or a price
Tell us your process, the colors you like and the quantity. A sales manager will reply with a recommendation and price.